GOURI polycaprolactone injectable skin rejuvenation and facial lifting implant

Compared to hyaluronic acid fillers, the aesthetic effect of this procedure lasts longer. The "Gouri" preparation, which naturally distributes evenly throughout the face, stimulates the production of the body's own collagen, which slows down due to the natural aging processes of the skin. This ensures comprehensive skin regeneration, firmness, and a long-lasting rejuvenation effect.

Results

Initial changes are usually visible within 1-2 weeks after the injection.

Course duration

Recommended course - 3 procedures every 4 weeks; additional 1-2 procedures after 3-6 months if needed.

Long-lasting effect

The effect usually lasts 6-12 months, depending on individual skin condition.

Natural effect

GOURI stimulates natural collagen synthesis and distributes evenly under the skin.

Compatibility

A 1-month break is recommended before and after other injections, especially with hyaluronic acid or botulinum toxin.

Suitable for

Intended for skin tightening, restoring facial contours, and correcting deep wrinkles for a natural result.

Important information

* "Summer Deals" may not apply to "Era Esthetic Avenue" doctors or specialists with more than 5 years of experience. When registering, we will inform you which doctors or specialists the offers apply to. When registering, we will gladly inform you which doctor or specialist the offers apply to.
* Summer Deals are valid for appointments made until august 31, using the code Summer.

Facial skin rejuvenation and lifting with Gouri liquid threads

Name	1 procedure	Price per procedure when purchasing packages
Name	1 procedure	2
Gouri liquid implant threads (1 syringe)	369€	350€	Buy

Procedure steps

1. Consultation and skin assessment

The doctor assesses the skin condition, discusses expectations, examines contraindications, and plans the course of procedures.

2. Preparation and marking

The face is cleansed, injection points are marked (usually about 10 points), and local anesthesia is discussed if necessary.

3. Injections

The GOURI preparation is injected into the dermal layer at selected points; the preparation distributes independently under the skin.

4. Massage and skin soothing

After injection, a gentle massage is performed to ensure even distribution of the preparation and to reduce the sensation of local tension.

5. After the procedure

It is recommended to avoid intensive physical activity, heat procedures, and direct sunlight; monitor local reactions and follow clinic instructions.

6. Course adjustment

To achieve the maximum result, a course of 3 procedures every 4 weeks is planned; an individual plan is discussed during the consultation.

GOURI liquid threads - natural facial skin rejuvenation and lifting

Why choose GOURI?

GOURI is a completely liquid polycaprolactone injectable implant that uses patented CESABP technology. The preparation spreads evenly under the skin, stimulates the natural collagen production process, and allows achieving natural tightening and improved skin texture with fewer injection points and no additional shaping actions.

Benefits and safety

Results are often visible after the first procedure, and the full effect intensifies over several weeks. For GOURI procedures, a course of 3 times every 4 weeks is recommended; the effect usually lasts 6-12 months. The preparation has CE marking, and the manufacturer provides additional quality certificates; therefore, the procedure is performed in the clinic only after a thorough patient evaluation.

GOURI polycaprolactone injectable skin rejuvenation and facial lifting implant. A natural and sustainable skin rejuvenation solution.

The new and promising skin rejuvenation and facial lifting technology GOURI is already with US — the ERA ESTHETIC clinic.

Why choose the GOURI skin rejuvenation and face lifting procedure?

It is a unique technology of a biodegradable active polymer that stimulates the formation of natural collagen in the skin, allowing the skin’s natural collagen to regenerate and restore the rate of its synthesis. It is also known as liquid implant sutures. GOURI’s mission is skin rejuvenation and facial lifting.

Benefits of GOURI skin rejuvenation and facial lifting:

self-distributes throughout the face;
significantly fewer injection points;
no additional shaping steps are required;
after the injection, a gentle massage is enough;
compared to hyaluronic injections, the cosmetic effect of this procedure is longer lasting.

GOURI skin rejuvenation and facial lifting indications:

This procedure is designed to restore facial tissue and volume by medium to deep injection of GOURI into the skin to correct deep facial wrinkles and folds.

GOURI’s main facial rejuvenation and skin lifting properties:

premium collagen stimulator;
fully dissolved polycaprolactone.

How is this facial rejuvenation and skin lifting procedure performed?

GOURI is injected into the facial skin — 10 injection points in total — and gently massaged in. The effect is achieved across the entire face. This unique technology stimulates fibroblasts (connective tissue cells that produce collagen), which help generate collagen production naturally. This is an essential condition for improving skin quality and texture.

A huge advantage of the GOURI facial rejuvenation and skin lifting procedure is that the effect is visible after the first treatment! However, based on clinical studies, specialist doctors recommend a full course of treatments — 3 treatments every 4 weeks — to achieve maximum results. If the patient’s skin is particularly problematic, i.e., deep wrinkles, or loss of elasticity, then it is recommended to repeat this GOURI Facial Rejuvenation and Skin Lifting Technology-based skin rejuvenation treatment 1–2 treatments 3–6 months apart. The innovative skin care plan is individually discussed with a medical specialist before the procedure.

A result that delights!

The GOURI skin rejuvenation and facial lifting treatment restores the skin’s natural elasticity, refines the contour of the face, and gives it a new chance to glow again! Thanks to the innovation of this technology, the skin ageing process can be slowed down. It is important to note that it is a natural and sustainable skincare solution.

Additional information about the technology

Manufacturer: Dexlevo INC. (South Korea)

Safety guarantee: approved by the American Food and Drug Administration (FDA)

GOURI‘s patented CESABP technology (Collagenesis-Enabled Solubilised Active and Biodegradable Polymer Technology)

____________________

Source: https://gorgeousgouri.com/why_gouri

What you need to know

Prepare for the consultation with the doctor: inform about medicines taken and health conditions. Avoid inflammatory processes in the facial skin area. If you use blood-thinning medications or have specific medical conditions, discuss this beforehand.

The procedure is performed on an outpatient basis. The doctor marks injection points, injects the preparation into the skin layer, and performs a gentle massage to ensure even distribution. For most patients, the procedure is well tolerated.

After the procedure, slight redness or swelling may occur, which usually subsides within a few days. It is advisable to avoid intensive physical activity, sauna, and direct sun exposure during the first 24-72 hours. Plan subsequent injection procedures on time – a 1-month break is recommended.

Frequently Asked Questions

What is the main advantage of the GOURI skin rejuvenation and facial lifting procedure?

GOURI rejuvenates the skin by stimulating collagenesis of the entire face. Naturally distributed all over the face, GOURI generates collagen production that has been reduced due to the ageing process.

When will the first results be visible?

It depends on the patient’s skin condition. After the injection, some time is needed to re-stimulate the collagen production process. Usually, the first visible results can be seen within 1–2 weeks.

How long does the skin rejuvenation and facial lifting effect of GOURI last?

The skin rejuvenation and skin lifting effects of GOURI are visible for 6 to 12 months (usually the time it takes for the polycaprolactone to break down). This is individual for each patient.

What is the recommended treatment interval?

Based on the results of a clinical study, we recommend 3 treatments every 4 weeks. For a more pronounced effect or in case of pronounced signs of skin ageing, an additional 1–2 treatments can be performed at intervals of 3–6 months to maintain collagen levels.

Can I remove (dissolve) the GOURI product after an injection?

GOURI is a polycaprolactone-based liquid injectable injected into the skin. It has a high molecular weight and cannot easily dissolve. However, it should be noted that this material does not cause an instantaneous change in volume and therefore there is no purpose in dissolving it. It does not cause any harm to the body.

Can the GOURI skin rejuvenation and facial lifting procedure be combined with other treatments, i.e., botulinum or hyaluronic injections, etc.?

A break of 1 month is recommended before and after the GOURI skin rejuvenation and facial lifting treatment. However, one of the strengths of GOURI skin rejuvenation technology is its compatibility with other products. However, when it comes to hyaluronic acid-based injections and related substances, a 1-month break is strictly recommended.

Does GOURI Skin Rejuvenation and Facial Lifting product have quality certificates?

GOURI has been awarded the CE marking certificate and all production facilities have been awarded ISO 13485 certification.

What is CESABP technology?

It is a completely liquid (no microparticles) technology for active and biodegradable polymers. It is a patented DEXLEVO technology that allows you to restore the natural collagen production process and renew your skin.

WE WERE THE FIRST IN LITHUANIA TO INTRODUCE THESE GOLD STANDARD* TECHNOLOGIES IN LASER DERMATOLOGY!

ULTHERA – non-surgical lifting of the skin, subcutaneous fat tissue and the superficial musculoaponeurotic system (SMAS).

ALEXANDRITE lasers – hair removal and pigmentation treatment. The most powerful PRO lasers in Lithuania; after a course, up to 95% of hair is removed.

VBEAM PERFECTA and PRIMA lasers – for treating redness and removing capillaries.

THERMAGE with the third-generation CPT system – thermolifting for skin tightening.

VELASHAPE III – anti-cellulite and circumference-reducing massage.

THE FIRST CLINICS IN LITHUANIA FOR THESE PROCEDURES:

FRAXEL DUAL fractional skin rejuvenation, CO2RE fractional skin rejuvenation, scar and stretch mark removal, OMNILUX red light therapy – acne treatment.

INTRACEUTICALS – oxygen skin therapy, HYDRAFACIAL with the TOWER system – professional facial cleansing.

*universally recognized as the most effective or leading technology for performing procedures and treatments.

This article is the intellectual property of ERA ESTHETIC AVENUE aesthetic and laser medicine clinic. The textual and other information on this website may not be copied, distributed or used in any way.